Acquisition of Temperature Changes Caused by Draft, Pressure or Friction During Operation

Mechanical components get loaded by pressure, draft or friction during operations. Those load types will all result in an increased temperature. Like this the running of a spindle will result in friction even though being well lubricated. If the spindle is not well positioned the friction will even increase. Infrared camera systems provide a fast overview of the status of the operation long before indications can be seen without such a device.

thermal imaging of a mount

Thermography Allows Inspections from a Safe Distance

thermal imaging of a diesel engine

The non-contacting nature of the thermographic measurements is a big advantage. Maintenance personnel can inspect rotating or other fast moving machine parts from outside a dangerous zone. Inspections are additionally eased up as a visualisation of the inspected area is provided.

Thereby, in case of emergency, first actions can be taken even before any profound analysis of the data has been carried out. Preset temperature thresholds for alarming and other personalized settings also help to get maintenance teams productive in very short time.

Get in contact with InfraTec thermography division

Would You Like to Know More?

It is not unusual for tasks to be associated with special requirements. Discuss your specific application needs with our specialists, receive further technical information or learn more about our additional services.

United States

InfraTec infrared LLC
Plano, TX 75024 Los Angeles, CAUSA

Contact information

Los Angeles, CA - Sales Office
+1 844 226 3722 (toll free)

Fast Movements Can Be Resolved by Infrared Camera Systems with High Frame Rates

Many mechanical movements run at high speeds. Infrared camera systems should be able to resolve such movements to selectively detect faults. Frame rates of up to 60 Hz in full frame mode of the inspection cameras out of the VarioCAM® High Definition series provide with exactly this advantage. Combined with sequence analysis tools of the thermographic software IRBIS® 3 smallest faults can be found right in the moment of emergence and subsequently those faults can be eliminated.

Thermographic control of an engine

Infrared Cameras for Maintenance of Mechanical Assemblies