Here you can find planar multi channel detectors from InfraTec.
Dual, triple and quad channel infrared detectors for gas analysis and flame detection sensors where more than one element or event is to be detected.
Available with reduced microphonic effect
JFET or CMOS amplifier
Type | Housing | Number of Channels | Aperture (mm) | Operating Mode | Amplifier | Thermal Compensation | Low Micro | Specific Detectivity* | Download further Information |
---|---|---|---|---|---|---|---|---|---|
LIM-222 | TO39 | 2 | ø 6.0 | Voltage Mode | JFET | 4.5 | LIM-222 | ||
LIM-262 | TO39 | 2 | ø 6.0 | Current Mode | OpAmp | 4.5 | LIM-262 | ||
LIM-272 | TO39 | 2 | ø 6.0 | Current Mode | OpAmp | 3.0 | LIM-272 Single supply operation | ||
LMM-244 | TO8 | 4 | ø 9.5 | Current Mode | OpAmp | 5.0 | LMM-244 | ||
LMM-274 | TO8 | 4 | ø 9.5 | Current Mode | OpAmp | 5.0 | LMM-274 Single supply operation |
* in 10
** in 10
*** bei R
Detectors for gas analysis and flame detection
Two, three or four spectral channels in one housing
Thermally compensated (optional)
With special chip holder for reducing the microphonic sensitivity (optional)
Low channel crosstalk (< 0.1 %)
Signal processing with JFET or operational amplifier
It is not unusual for tasks to be associated with special requirements. Discuss your specific application needs with our experienced engineers, receive further technical information or learn more about our additional services.
InfraTec offers different product groups including approximately 50 standard pyroelectric detectors. Detectors with reduced microphone technology and integrated operational amplifier as well as digital detectors are part of our product range.
Choose your suitable infrared detectors with the help of our detailed detector search.