Pyroelectric detectors with highest quality, uncooled,
highly stable performance
Since 1991 InfraTec has designed and manufactured
high quality Pyroelectric Infrared Detectors in Dresden,
Germany. These optoelectronic thermal sensors use a lithium
tantalate (LiTaO3)
element that produces an electrical charge
when modulated energy (0.1 Hz or greater)
strikes its surface.
More about InfraTec
Data in our PRODUCTS area
will help determine the sensor / detector you need. Options for
built-in JFET or OpAmp, thermal compensation, or
special mounting techniques to reduce the effect of
vibration (low-microphonics) and custom filters are
identified. See
our FAQ for answers to frequently asked questions.
A HERMETIC seal and filling with Nitrogen results
in a highly stable and reliable infrared sensor with a long
life.
For GAS ANALYSIS, FLAME DETECTION and more…
InfraTec has focused on wavelengths between 2-8µm
for use in IR detectors used in temperature sensors,
gas detectors, and motion detectors, but we are seeing increased
interest in the 9-10µm region and above for
infrared detectors used in steel
manufacturing, water quality, satellite orientation,
breathe analyzers and more.
Whether you need 10 or 10,000 thermal sensors, we have a
detector to
meet your needs. Please
contact
our sales office for technical discussions
regarding your application.
Spectrometer
device for analytical and gas sensing instruments.
Electrostatic drive, >1µm tuning range, resolving
power λ/ Δλ up to 60. Evaluation Kit for Fabry-Perot Detectors
